Welcome to KINGREAL UNIVERSAL IND LTD
Tel: 86-18610083868
       86-20 2237 8256
Email:[email protected]
           [email protected]

FAQ

Contact Us

You are here:HOME >> FAQ

FAQ

The origin and development of the metal ceiling

Time:2022-01-28 Views:612

Metal ceiling is produced by Metal Ceiling Tile Press Machine, which is a general term for decorative interior roofing materials. In the past, straw mats, reed mats and wooden boards were the main materials in traditional dwellings. With the advancement of technology, more modern building materials have been applied.

Metal ceilings play an extremely important role in home decoration. The ceiling decoration also plays the role of covering beams, columns, pipelines, heat insulation and sound insulation.

In addition, the shape of the ceiling is wonderful and varied, each of which can create a different decorative effect. When you‘re renovating your new home, you need tochoose the better machine, such as KINGREAL.

 

Now ceilings are mainly used in airports, stations, office buildings, shopping malls, subway stations and residences. There are gypsum board, mineral wool board, PVC, aluminum gusset and soft ceiling on the market.

Now gypsum board and mineral wool board are also constantly improving, including waterproof gypsum board and sound-absorbing mineral wool board. However, they have a single plate shape and are not easy to scrub. They are installed on open frame keels and are mostly used in engineering.

 

PVC products have poor oxidation resistance, no moisture resistance, no fire resistance, easy deformation and discoloration, and are mostly used in old-fashioned ordinary home decoration. With the improvement of people‘s requirements for decoration quality, now home decoration has basically used aluminum gussets to make ceilings.

 

The third generation metal ceiling;

1. The smooth and flawless roller-coated sheet is a composite material made of high-quality aluminum-magnesium alloy sheet as the substrate. After strict decreasing and chemical treatment on the surface of the aluminum sheet, the imported PVDF fluorocarbon coating is rolled and dried and cured.

2. The rapid development of the roller coating plate is mainly because it turns the traditional spray coating into a continuous coating. After the roller coating treatment, it is dried and cured, which is different from the ordinary chemical treatment method of dip coating.

It not only effectively controls the coating quality, but also eliminates defects such as edges and dead corners that are easily generated by coating. At the same time, it can also be operated with unmarked treatment liquid to reduce environmental pollution and meet the environmental protection requirements of developed countries.

 

3. The roller-coated ceiling is bright in color, not only has the strength and excellent flexibility of aluminum plate, but also has good corrosion resistance and weather resistance of the paint film. It can not only withstand deformation under high wind pressure, but also can be cut,slit,punched,slotted,drilled and can completely replace similar imported products.

Therefore, it is widely used in the construction industry:industrial plants,office buildings, shopping malls,stations,subways,airport buildings,modern large hangars,large gymnasiums,large clubs and so on.

With the development of the times, the field of home decoration has also entered the mainstream of the decoration industry.

Copyright © 2019 KINGREAL UNIVERSAL IND., LTD All Rights Reserved.