What affects Metal Ceiling Tile Equipment prices?

Metal Ceiling Tile Production line is a machine for processing aluminum ceiling panels, including automatic integrated ceiling equipment, one-time forming integrated ceiling equipment, secondary integrated ceiling equipment and engineering ceiling equipment.

I believe that there are many kinds of equipment with different prices on the Internet. Why is the price of the same suspended ceiling equipment different, and the different is tens of thousands of dollars.

What is the problem after all? This problem needs to be analyzed from the following three aspects:

1. Cylinder

The size of the oil cylinder directly affects its pressure. In order to save costs, some manufacturers reduce the main oil cylinder. If the main cylinder is reduced, there is no pressure, and the pressure is not enough! Worse still, it didn’t even bring a lower tank, which will be easy to break the spring during long-term production and will directly affect the production efficiency.

Therefore, when choosing a Metal Ceiling Tile Production Line, what we must care about is whether there is a main oil cylinder and whether there is a lower cylinder, rather than directly concerned about the price.

2. Look at various valve bodies and motors.

Generally, if you want to make low-cost equipment, I believe that is will not use a good solenoid valve. It must be a cheap valve. The cheap solenoid valve will definitely cause problems such as short service life and too high voltage, which is easy to burn out. And the motor will generally buy some aluminum core motors, which will cause the machine to operate slowly and have low efficiency. This also directly affects the cost and price of equipment.

3.Of course, there are some small issues that cannot be ignored, such as the size of the fuel thank and the size of the tubing. If the fuel tank is made small, the oil temperature rises rapidly during production and processing, which will cause damage to the cylinder seal.