Features of Aluminum Metal Ceiling production line

After the raw materials are prepared, the aluminum gusset mold and the machine to be used are placed.

Then add hydraulic oil, take a semi-finished aluminum gusset plate in one hand, and put it into the mold edge. Press the switch button with both hands, a process, a machine and a set of molds, one person operates. It is possible to cut four corners of a semi-finished aluminum gusset, and fold the four sides of the ceiling aluminum gusset product.

The advantage of one-time molding is that only one worker is required to operate, the process is simple, the operation is simple, the use is simple, and the maintenance is simple.

Aluminum ceiling secondary molding equipment requires two machines with two molds and two workers to operate.

One person is used to process the corners, the other is used to process the forming, and it takes two people to process an integrated ceiling aluminum gusset product.

The machine is also relatively simple to use, simple to operate, and simple to maintain.

The secondary molding process is mainly composed of 40T integrated ceiling hydraulic press and 25T integrated ceiling hydraulic press. Aluminum ceiling secondary molding equipment has been gradually eliminated because of its high investment cost, waste of labor and time.

Feature of Aluminum Metal Ceiling Production Machine:

1. The main cylinder can go down quickly with no load and return quickly.

2. The return stroke of the lower cylinder is fast, which does not affect the rising speed;

3. The operation is convenient and fast, with jog and full automatic;

4. High safety factor, equipped with photoelectric protection and overload protection device;

5. Good working performance, the supporting electrical appliances and hydraulic main parts are imported parts.

6. Save energy, use high pressure, large flow, constant power, low noise and fast oil supply.

You can also to visit our website to know more about the Metal Ceiling Machine.