CW UW Metal Profile Introduction

The basic structure of C channel profile making machine is decoiler, continuously cold roll forming, hydraulic follow shearing, auto stacking system, etc.

Machine Features:

- Double heads decoiler

- High speed cold roll forming

- Combi structure for your choice to produce different steel profiles on one machine

- Machine protection

- Hydraulic fly shearing

- Auto stacking system for your choice.

The CW UW profile is the supporting element of the crate. It has the same purpose as the ceiling profile, but differs slightly from it in overall dimensions. The length of the profile reaches 3 or 4 meters, the height is only 4 cm, and the width is within 5-10 cm. The profile is made of steel with a thickness of 0.4 to 0.6 mm.

The load-bearing element is usually used when creating shaped ceilings. The first solid tier of the ceiling structure is usually constructed from ceiling and guide rails, and for the device of the second figured level, a UW profile is used. It can be attached directly to the frame of the first level or mounted on suspensions. Only the wide side of this element has a profiled surface, and its shelves are smooth.