How to prevent the oil temperature from being too high when the hydraulic press is in use?

Video About Hydraulic Press Forming Machine

Description of Hydraulic Press Forming Machine

Hydraulic Press Forming Machine is equipped with a guide column and driven by a hydraulic system, it is beneficial for ensuring accuracy and improving consistency in production.

The metal ceiling tile bending forming machine is easy to operate and can continuously bend forming ceiling panels of different sizes. It also can bend forming different types of ceiling panels by changing molds, such as lay in ceiling tile and clip in ceiling tile. KINGREAL CEILING MACHINERY also can provide mold set, so you can be free from worry about conversion between different types of ceiling tile production. 

How To Prevent The Oil Temperature From Being Too High When The Hydraulic Press Forming Machine Is In Use?

1. Use the hydraulic oil recommended by the manufacturer of the hydraulic press and the hydraulic oil with the appropriate viscosity. If the hydraulic oil has a high viscosity, especially in areas where the ambient temperature is relatively low, it will cause an increase in flow friction and overheating.

2. Keep the outside and inside of the oil system clean. The contaminants outside the system can isolate and hinder normal oil cooling. The contaminants inside the system will cause wear and tear and cause oil leakage. Both situations will occur. Cause heat generation.

3. The hose should be clamped and positioned reliably, and the pump, hydraulic cylinder and other hydraulic components should be replaced in time when they are worn out. Because worn components will increase the leakage, the pump will output full flow for a long time, and the oil passing through the narrow leakage gap will cause a large pressure drop. The increase of time in the case of slow flow output also increases fluid friction. The time for which the force is generated, therefore, the temperature of the oil will rise.

4. Regularly replace the filter element of the metal ceiling tile bending forming machine to avoid clogging of the filter.

5. Regularly check the water cooler of the metal ceiling tile bending forming machine and regularly descale the water cooler.

6. Excessive oil return pressure is also one of the reasons for high oil temperature. The reason for the increase of the backup pressure should be checked and eliminated.

7. Check the fluid level of the oil tank of the metal ceiling tile bending forming machine frequently. If the oil level is too low, the system will not have enough fluid to take away the heat.



If you have any questions about hydraulic press forming machine, please contact KINGREAL CEILING MACHINERY!