How to maintain a hydraulic press?
Time:2021-03-09
Views:3002
Hydraulic machine maintenance
1. The staff of the hydraulic press should have relative qualifications and must hold a certificate. Those who do not know the equipment are prohibited from starting and operating the hydraulic press.
2. Wear the required labor protection supplies before class.
3. Check the following categories before starting: whether the photoelectric protection device is reliable, whether the limit switches are sensitive, and whether the standard parts have fallen off.
4. Clean up the dirt on the countertop and abrasive tools, adjust the pressure, and the stroke arrangement of the guide rail slide block. The empty car runs for one to two minutes, and everything is normal and it can be working.
5. The pressure handle on the equipment has been adjusted to fit when it is set at the factory, and non-adjusting staff cannot adjust it casually.
Maintenance rules and regulations
1. Carry out lubrication maintenance according to the equipment‘s lubrication regulations.
2. After the CNC lathe works for one year, the hydraulic oil should be released from the car oil tank of the bed body to clean the car oil tank, and the hydraulic oil should be refilled with the considered hydraulic oil. The remaining oil should be clearly at the bottom of the oil standard at the 3/4 aspect ratio.
3. The oil filter net on the oil suction pipe must be cleared or cleaned in various ways on time.
4. Regularly maintain whether the handles, knobs, and function keys are damaged.
5. The motor must be kept clean, and the air intake grille of the motor must always maintain a stable natural ventilation and not be blocked.
6. Lubricate the CNC lathe and clean the CNC lathe 10 minutes before the end of get off work every day.
7. It is forbidden for non-operating personnel to actually operate the machine and equipment, and it is always necessary to ensure that people leave the machine and stop.
Secondary maintenance of hydraulic press
1. Check whether all standard parts such as poles and shells have fallen off or are damaged, and adjust or repair them according to the conditions.
2. Disassemble and assemble the main cylinder and eject the cylinder according to the conditions, check all parts and repair damaged parts.
3. Clean the car fuel tank and fill up the hydraulic oil.
4. Check the high-pressure water pump, repair or replace damaged parts according to the condition.
5. Disassemble and check the hydraulic parts on the control box and control panel, repair or replace according to the damage condition.
6. Welding adjustment to maintain all the normal operation of the hydraulic press, the actual operation is flexible and reliable.
7. Repair the household appliance box and electrical system so that it is clean and tidy inside and outside, and can be trusted.
8. Repair the motor and fill or replace the grease.
Email
MR tan
Mr Tan