What should be done after the hydraulic press is used?
Time:2021-03-22
Views:2989
1. Clean the hydraulic oil pump and filter screen.
2. Check and tighten the upper and lower cylinder heads, motor bases and hammer body foundation screws to ensure that the hydraulic press is tight and reliable.
3. The control handle switches of the hydraulic press are set to neutral.
4. Check, clean and tidy up the working surface and working area of the hydraulic press.
5. Scrub, check, and dredge the hydraulic oil circuit to achieve good lubrication and eliminate oil leakage.
Email
MR tan
Mr Tan