How to choose the square metal ceiling?

Square metal ceiling is produced by Square Metal Ceiling Making Machine, which is a very common ceiling material. Because of its special material, light texture, and it is not afraid of moisture or oil contamination, it is widely used in the two spaces of kitchen and bathroom.

While protecting the ceiling of these two spaces, is also has a certain decorative effect, so it is one of the ceiling materials that many people must choose when decorating.

Many people usually only consider the color and thickness of the aluminum buckle when choosing, and think that the thicker the better, in fact, this is not entirely correct. Before skills, as long as this is the best way to avoid buying low-quality square metal ceiling.

Let me share with you 5 tips for selecting square metal ceiling, I hope it will be helpful to everyone.

Look at the brand

Generally speaking, good brand,such as KINGREAL and the square metal ceiling are all produced by regular aluminum factories. Inferior aluminum gussets

easy to bend and break due to the poor quality of aluminum materials, while good aluminum gussets are not easy to bend, and have good flexibility and high strength, and they will rebound when they are bent.

See thickness

The country has certain standards for the thickness of square metal ceiling, which stipulate that the thickness should be between 0.4mm-0.7mm. Therefore, square metal ceilings are not as thick as possible, nor are they thin and poor. The thickness within the standards set by the country is better.

When purchasing square metal ceiling plates, I personally recommend choosing a thickness of 0.6 to 0.8 direct. Such square metal ceilings are smooth to install and will not be easily deformed in the later stage.

Look at the craft

In addition to the quality of the raw materials and the thickness of the plate, the quality of the square metal ceiling also determines the quality of the square metal ceiling.

The process of square metal ceiling is usually divided into three types: spraying, rolling and laminating. Among them, the roll-coated board has the most abundant colors, good water resistance, easy scrubbing, strong styling, light texture, and overall cost-effectiveness.

See after-sales

Having a complete after-sales processing system allows us to feel more at ease when we consume.

When purchasing aluminum gussets, most of what we see are semi-finished products, which can only be used after installation by professional installation methods. If there is a problem during the installation process or within a short period of time after use, the merchant can solve the problem in time to avoid affecting the use Only by effect can we have a good consumer experience.

Summary:

When buying aluminum gussets, it is far from enough to look at the pattern and the thickness of the sheet. The process, keel, and after-sales of the product are very important, and the regular and common products are more secure than those produced by small workshops. Bigger, so when we buy, we try not to greedy the small and cheap, so that our gains outweigh our losses.