KINGREAL steel ceiling tile making machine exported to India
Time:2019-09-27
Views:4886
KINGREAL Semi-automatic suspended metal ceiling tile production line had been successfully approved and installed in India.
The semi automatic false ceiling tile making machine including decoiler with trolley, pre-straightener, high speed perforation press, servo feeder, notching & shearing press, conveyor, precision straightener, and manual metal ceiling tile bending forming machine.
KINGREAL INDIA false ceiling tile perforation line is featured with high speed, stable output, low faults and high performance. The metal ceiling tile notching and shearing is finished in one step to make the size more accurate and the procedure easier.
KINGREAL INDIA 60*60CM CLIP IN/ LAY IN ceiling tile production line is controlled by PLC, and the ceiling tile making machine use high quality YASKAWA servo feeder motor to ensure the accurate of the production.
The metal ceiling tile making machine can produce both CLIP in ceiling tile and LAY in ceiling tile. When produce different types of ceiling tiles, it needs to change the notching & shearing molds set, also the bending forming molds set.
The metal ceiling plate bending forming press is manual operation. One worker will take the sheet and put into the press mold, the press the button to finish one time bending forming. The press has photoelectic fence to avoid human injury accident.
KINGREAL offer full automatic solution for square metal ceiling tile production, the pre-straightener can be equipped with film lamination device and it can automatic put the protective film on the sheet surface.
KINGREAL high speed squre metal ceiling tile perforation line can perforate 600*600mm CLIP IN / LAY IN ceiling tile, 600*1200mm CLIP IN/ LAY IN ceiling tile, 300*300mm metal ceiling tile. And the perforation holes diameter can be changed by different perforation molds.
KINGREAL INDIA metal ceiling board production machine can produce both aluminum ceiling tile and also steel ceiling tile. To produce different materials, different perforation die need to be used. And each perforation mold can produce material thickness range 0.1mm. If need to produce wide range thickness materials, may need to change the perforation pins or perforation molds.
Email
MR tan
Mr Tan