HIGH SPEED 600MM ALUMINUM CEILING TILES PRODUCTION LINE INTRODUCTION

This 600MM* 600MM High Speed ALuminum Ceiling Tile Production line is mainly used for the production of different kinds decoration ceiling tiles which is half perforation ceiling tiles and it adopt automatic material input, first flattening, holes punching, servo feeding, cutting to length, conveyor, second flatting, corner cutting and full automatic punch forming.

With this high speed ceiling plate production line, it can produce up to 16-18 PCS/min half perforation ceiling tiles.

The production line is featuring with full automatic, high precision, fast production speed and few operation workers. Which is first choice for the decoration material factories.

FINAL PRODUCTS PICTURE

Our full automatic ceiling tile production line is usually for produce half perforation ceiling tiles.

FLOWCHART OF FULL AUTOMATIC CEILING PRODUCTION LINE

Ceiling panel with perforation production line This production line focuses on the processing production for decorating ceiling. It consists of a series of procedures, decoiler, first time leveling. servo feeding, punching hook hole & hole arrangement, hydraulic cut-off device, conveying belt, second leveling, automatic feeding, hydraulic angle punching, manually stretching forming etc. And half part of the production line is fully automatic. As for decorative materials manufacturers, it is always their first choice.



With this equipment, it can realize high machining precision, high processing speed, less operators etc. The equipment adopts servo motor by combining programmable PLC processor, some parts of which make use of Panasonic. Also, servo feeding is based on Yaskawa motor and all Schneider electric components. Under its control, it operates sensitively and discharging material precision can reach ±0.2mm. In the aspect of product precision, it totally replaces traditional manually operation and avoids uncontrollable situation.

This high speed false ceiling plate production line is featured with high automation and it can produce the metal ceiling tiles contiously with high speed.



Kingreal can provide the high quality oil press machine for produce the perforation ceiling tiles. Hydraulic oil press is used for cutting the corner and bending forming the ceiling plates.



Full automatic high speed ceiling tile making machine is for producing and manufacture the metal false ceiling tiles. Right now most metal false ceiling manufacturers use semi-auto or manual production lines to produce all kinds of ceiling sheet.






Basic process of high speed perforation ceiling tile production line is decoil, high speed perforation, levelling, corner cutting, auto turn and corner cutting then auto pack. This system is featured with high speed, less operators and workers and high effciency.



High speed metal false ceiling production line, with less workers and get high speed production line. Few operators and high precision to ensure your products quality and high profit. Our high speed metal false ceiling tile making machine is featured with high speed, less workers and precision final products. It is easy to control the final product quality and make the production cost lower to get your products more strength.



According to the perforation speed, it would be about 16-18PCS for the half perforation line. After this production line, we need two bending forming oil press machine to catch speed of perforation line. The ceiling tile production line will be distributed on two different conveyers and turn the ceiling tiles automatically, the feed to the bending machine machine by manipulator, at the same time, the finsihed products will be taken out from the bending forming machine.



This is auto turn device for the ceiling sheet. Usually after perforation, there will be some spurs on the surface, to make the final productts higher quality we need to turn the panels automatically.

This is auto stack system for the final stage- high speed automatic ceiling plate production line. One formed ceiling plates will be drop down on the stacker first, then another one ceiling sheet will be turned and dropped down. Then repeat again to avoid scratch of the ceiling tiles. After stacked to certain height, the stacker will be pushed out, then the final products will be moved to the painting positon to do the painting and stick the acoustical textile.



This is auto stack system for the final stage- high speed automatic ceiling plate production line. One formed ceiling plates will be drop down on the stacker first, then another one ceiling sheet will be turned and dropped down. Then repeat again to avoid scratch of the ceiling tiles. After stacked to certain height, the stacker will be pushed out, then the final products will be moved to the painting positon to do the painting and stick the acoustical textile on the textile non-woven stick machine.