How to remove metal ceiling tiles?

Base on the inexpensive and simple to install, the metal ceiling tiles which is produced by aluminum ceiling tile machine are favored in basements and office spaces.

However, the gypsum tiles used in suspended ceilings can be easily damaged and discolored. Many people are wondering how to keep the ceiling looking its best.

There are 4 steps to remove the metal ceiling tiles will allow you to replace it with a fresh one.

1.    Cover the floor with a protective material if desired.

Before you remove the metal ceiling tiles, you should lay down something to protect the debris from getting onto your floors. For example, if you are removing large amounts of ceiling tile, a tarp is the best choice.

2.    Lift the tile out of the ceiling frame.

Each ceiling tile in your suspended ceiling will be held in place by resting on the T-shaped metal frame. Gently push the tile upwards to lift it out of the frame.

It’s important that you should use both hands to avoid damaging the tile and generating debris.

3. Angle the tile so that it fits through the frame opening.

Generally speaking, the ceiling tile will be a little larger than the opening so that it can rest securely on the frame without falling through. When you remove it, rotate it about 45 degrees in the space above the ceiling.

The tile should easily fit through the square opening when positioned along the diagonal.

4.Pull the ceiling tile out of the frame.

Gently lower the tile through the frame, and set it onto your protective floor covering. Repeat this process for any other tiles that need to be removed. Your floor covering can then be carefully discarded along with any debris.

By the way, you should choose a news ceiling tile to replace the old one. KINGREAL baffle ceiling roll forming machine can produce various metal ceiling tiles, which is a good choice for you.