3-in-1 Combination Introduction
Time:2021-02-07
Views:2802
The three-in-one combination is composed of a fully automatic hydraulic decoiler, a plate precision leveler, an NC servo feeder and a high-speed punch. It has the characteristics of high beat, high efficiency, high quality, and low cost.
Machine and equipment composition:
1. Fully automatic hydraulic decoiler. First, the rolling stock is placed on the V-shaped worktable of the hydraulic feeding trolley of the uncoiler by the crane, and the feeding trolley automatically receives the materials and runs to the uncoiler. Through the control system, according to the delivered coil specifications, the automatic Position the blanking system and issue corresponding instructions so that the feeding trolley can automatically run to the blanking system, place the sheet in the centering position, and use the hydraulic expansion and contraction reel to tighten the roll after positioning Uncoiling and unwinding are carried out, and the steel coil feeding, feeding, tensioning and unwinding processes are fully automated.
2. Precision leveling machine for medium and heavy plates. The feeding adopts the cylinder pressing method, and the adjustment adopts the worm gear adjustment method. Through the leveling rollers arranged up and down, the sheet is repeatedly pressed and deformed to remove the stress to obtain the flatness of the sheet, and finally reach the leveler. The effect of high precision and speed.
3, NC servo feeder. The NC servo feeder adopts a full set of Mitsubishi system control, and the feeding roller is directly driven by a servo motor. The feeding accuracy is high and stable, usually up to ±0.02mm. At the same time, it is equipped with a high-efficiency relaxation device, which can meet the convex theory signal of the punch And the purpose of simple material thickness adjustment to ensure the stability of repeated feeding accuracy after long feeding.
Email
MR tan
Mr Tan